Based on kernel version 7.3. Page generated on 2026-10-19 13:17 EDT.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright (C) 2026 Ideas on Board Oy %YAML 1.2 --- $id: http://devicetree.org/schemas/media/i2c/sony,imx678.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Sony IMX678 Sensor maintainers: - Jai Luthra <jai.luthra@ideasonboard.com> description: Sony IMX678 diagonal 8.86 mm (Type 1/1.8) CMOS active pixel type solid-state image sensor with a square pixel array and 8.40M (3856x2180) effective pixels. allOf: - $ref: /schemas/media/video-interface-devices.yaml# properties: compatible: items: - enum: - sony,imx678-aamr - sony,imx678-aaqr - const: sony,imx678 description: The IMX678 sensor exists in a colour variant (IMX678-AAQR) and a mono variant (IMX678-AAMR). The variant-specific compatible describes the exact sensor variant, with the generic IMX678 compatible as a fallback. reg: maxItems: 1 clocks: description: | Input clock (INCK). Only the rates listed in the datasheet are supported: 13.5, 18, 24, 27, 36, 37.125, 72, and 74.25 MHz. maxItems: 1 avdd-supply: description: Analog power supply (3.3V) ovdd-supply: description: Interface power supply (1.8V) dvdd-supply: description: Digital power supply (1.1V) reset-gpios: description: Sensor RESETN (XCLR) GPIO maxItems: 1 port: $ref: /schemas/graph.yaml#/$defs/port-base additionalProperties: false properties: endpoint: $ref: /schemas/media/video-interfaces.yaml# unevaluatedProperties: false properties: data-lanes: oneOf: - items: - const: 1 - const: 2 - items: - const: 1 - const: 2 - const: 3 - const: 4 - items: - const: 1 - const: 2 - const: 3 - const: 4 - const: 5 - const: 6 - const: 7 - const: 8 required: - data-lanes - link-frequencies required: - endpoint required: - compatible - reg - clocks - avdd-supply - ovdd-supply - dvdd-supply - port unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> i2c { #address-cells = <1>; #size-cells = <0>; camera@1a { compatible = "sony,imx678-aaqr", "sony,imx678"; reg = <0x1a>; clocks = <&imx678_clk>; avdd-supply = <&camera_avdd_3v3>; ovdd-supply = <&camera_ovdd_1v8>; dvdd-supply = <&camera_dvdd_1v1>; reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>; port { imx678: endpoint { remote-endpoint = <&cam>; data-lanes = <1 2 3 4>; link-frequencies = /bits/ 64 <720000000>; }; }; }; }; ... |