Documentation / devicetree / bindings / media / i2c / ovti,ov08d10.yaml


Based on kernel version 7.2. Page generated on 2026-08-20 08:41 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/ovti,ov08d10.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Omnivision OV08D10 1/4-Inch 8MP CMOS color image sensor

maintainers:
  - Matthias Fend <matthias.fend@emfend.at>

description:
  The Omnivision OV08D10 is a 1/4-Inch 8MP CMOS color image sensor with an
  active array size of 3280 x 2464. It is programmable through I2C
  interface. Image data is transmitted via MIPI CSI-2 using 2 lanes.

allOf:
  - $ref: /schemas/media/video-interface-devices.yaml#

properties:
  compatible:
    const: ovti,ov08d10

  reg:
    maxItems: 1

  clocks:
    description: MCLK input clock (6 - 27 MHz)
    maxItems: 1

  reset-gpios:
    description: Active low XSHUTDN pin
    maxItems: 1

  dovdd-supply:
    description: IO power supply (1.8V)

  avdd-supply:
    description: Analog power supply (2.8V)

  dvdd-supply:
    description: Core power supply (1.2V)

  port:
    $ref: /schemas/graph.yaml#/$defs/port-base
    additionalProperties: false

    properties:
      endpoint:
        $ref: /schemas/media/video-interfaces.yaml#
        unevaluatedProperties: false

        required:
          - data-lanes
          - link-frequencies

    required:
      - endpoint

required:
  - compatible
  - reg
  - clocks
  - port

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/media/video-interfaces.h>
 
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
 
        sensor@36 {
            compatible = "ovti,ov08d10";
            reg = <0x36>;
 
            clocks = <&ov08d10_clk>;
 
            dovdd-supply = <&ov08d10_vdddo_1v8>;
            avdd-supply = <&ov08d10_vdda_2v8>;
            dvdd-supply = <&ov08d10_vddd_1v2>;
 
            orientation = <2>;
            rotation = <0>;
 
            reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
 
            port {
                ov08d10_output: endpoint {
                    data-lanes = <1 2>;
                    link-frequencies = /bits/ 64 <360000000 720000000>;
                    remote-endpoint = <&csi_input>;
                };
            };
        };
    };
...