# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright (c) 2024 Linaro Ltd.
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/ovti,ov08x40.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Omnivision OV08X40 CMOS Sensor

maintainers:
  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>

description: |
  The Omnivision OV08X40 is a 9.2 megapixel, CMOS image sensor which supports:
  - Automatic black level calibration (ABLC)
  - Programmable controls for frame rate, mirror and flip, binning, cropping
    and windowing
  - Output formats 10-bit 4C RGB RAW, 10-bit Bayer RAW
  - 4-lane MIPI D-PHY TX @ 1 Gbps per lane
  - 2-lane MPIP D-PHY TX @ 2 Gbps per lane
  - Dynamic defect pixel cancellation
  - Standard SCCB command interface

allOf:
  - $ref: /schemas/media/video-interface-devices.yaml#

properties:
  compatible:
    const: ovti,ov08x40

  reg:
    maxItems: 1

  clocks:
    maxItems: 1

  avdd-supply:
    description: Analogue circuit voltage supply.

  dovdd-supply:
    description: I/O circuit voltage supply.

  dvdd-supply:
    description: Digital circuit voltage supply.

  reset-gpios:
    description: Active low GPIO connected to XSHUTDOWN pad of the sensor.

  port:
    $ref: /schemas/graph.yaml#/$defs/port-base
    additionalProperties: false

    properties:
      endpoint:
        $ref: /schemas/media/video-interfaces.yaml#
        additionalProperties: false

        properties:
          data-lanes:
            oneOf:
              - items:
                  - const: 1
                  - const: 2
              - items:
                  - const: 1
                  - const: 2
                  - const: 3
                  - const: 4
          link-frequencies: true
          remote-endpoint: true

        required:
          - data-lanes
          - link-frequencies
          - remote-endpoint

required:
  - compatible
  - reg
  - clocks
  - port

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
 
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
 
        ov08x40: camera@36 {
            compatible = "ovti,ov08x40";
            reg = <0x36>;
 
            reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
            pinctrl-names = "default";
            pinctrl-0 = <&cam_rgb_defaultt>;
 
            clocks = <&ov08x40_clk>;
 
            assigned-clocks = <&ov08x40_clk>;
            assigned-clock-parents = <&ov08x40_clk_parent>;
            assigned-clock-rates = <19200000>;
 
            avdd-supply = <&vreg_l7b_2p8>;
            dvdd-supply = <&vreg_l7b_1p8>;
            dovdd-supply = <&vreg_l3m_1p8>;
 
            port {
                ov08x40_ep: endpoint {
                    remote-endpoint = <&csiphy4_ep>;
                    data-lanes = <1 2 3 4>;
                    link-frequencies = /bits/ 64 <400000000>;
                };
            };
        };
    };
...