Based on kernel version 6.17. Page generated on 2025-10-03 10:04 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 |
.. SPDX-License-Identifier: GPL-2.0
====================
mlx4 devlink support
====================
This document describes the devlink features implemented by the ``mlx4``
device driver.
Parameters
==========
.. list-table:: Generic parameters implemented
* - Name
- Mode
* - ``internal_err_reset``
- driverinit, runtime
* - ``max_macs``
- driverinit
* - ``region_snapshot_enable``
- driverinit, runtime
The ``mlx4`` driver also implements the following driver-specific
parameters.
.. list-table:: Driver-specific parameters implemented
:widths: 5 5 5 85
* - Name
- Type
- Mode
- Description
* - ``enable_64b_cqe_eqe``
- Boolean
- driverinit
- Enable 64 byte CQEs/EQEs, if the FW supports it.
* - ``enable_4k_uar``
- Boolean
- driverinit
- Enable using the 4k UAR.
The ``mlx4`` driver supports reloading via ``DEVLINK_CMD_RELOAD``
Regions
=======
The ``mlx4`` driver supports dumping the firmware PCI crspace and health
buffer during a critical firmware issue.
In case a firmware command times out, firmware getting stuck, or a non zero
value on the catastrophic buffer, a snapshot will be taken by the driver.
The ``cr-space`` region will contain the firmware PCI crspace contents. The
``fw-health`` region will contain the device firmware's health buffer.
Snapshots for both of these regions are taken on the same event triggers.
|