Based on kernel version 4.16.1. Page generated on 2018-04-09 11:53 EST.
1 Kernel driver i2c-sis5595 2 3 Authors: 4 Frodo Looijaard <frodol@dds.nl>, 5 Mark D. Studebaker <mdsxyz123@yahoo.com>, 6 Philip Edelbrock <phil@netroedge.com> 7 8 Supported adapters: 9 * Silicon Integrated Systems Corp. SiS5595 Southbridge 10 Datasheet: Publicly available at the Silicon Integrated Systems Corp. site. 11 12 Note: all have mfr. ID 0x1039. 13 14 SUPPORTED PCI ID 15 5595 0008 16 17 Note: these chips contain a 0008 device which is incompatible with the 18 5595. We recognize these by the presence of the listed 19 "blacklist" PCI ID and refuse to load. 20 21 NOT SUPPORTED PCI ID BLACKLIST PCI ID 22 540 0008 0540 23 550 0008 0550 24 5513 0008 5511 25 5581 0008 5597 26 5582 0008 5597 27 5597 0008 5597 28 5598 0008 5597/5598 29 630 0008 0630 30 645 0008 0645 31 646 0008 0646 32 648 0008 0648 33 650 0008 0650 34 651 0008 0651 35 730 0008 0730 36 735 0008 0735 37 745 0008 0745 38 746 0008 0746 39 40 Module Parameters 41 ----------------- 42 43 * force_addr=0xaddr Set the I/O base address. Useful for boards 44 that don't set the address in the BIOS. Does not do a 45 PCI force; the device must still be present in lspci. 46 Don't use this unless the driver complains that the 47 base address is not set. 48 49 Description 50 ----------- 51 52 i2c-sis5595 is a true SMBus host driver for motherboards with the SiS5595 53 southbridges. 54 55 WARNING: If you are trying to access the integrated sensors on the SiS5595 56 chip, you want the sis5595 driver for those, not this driver. This driver 57 is a BUS driver, not a CHIP driver. A BUS driver is used by other CHIP 58 drivers to access chips on the bus.