Based on kernel version 6.11
. Page generated on 2024-09-24 08:21 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/net/dsa/renesas,rzn1-a5psw.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Renesas RZ/N1 Advanced 5 ports ethernet switch maintainers: - Clément Léger <clement.leger@bootlin.com> description: | The advanced 5 ports switch is present on the Renesas RZ/N1 SoC family and handles 4 ports + 1 CPU management port. allOf: - $ref: dsa.yaml#/$defs/ethernet-ports properties: compatible: items: - enum: - renesas,r9a06g032-a5psw - const: renesas,rzn1-a5psw reg: maxItems: 1 interrupts: items: - description: Device Level Ring (DLR) interrupt - description: Switch interrupt - description: Parallel Redundancy Protocol (PRP) interrupt - description: Integrated HUB module interrupt - description: Receive Pattern Match interrupt interrupt-names: items: - const: dlr - const: switch - const: prp - const: hub - const: ptrn power-domains: maxItems: 1 mdio: $ref: /schemas/net/mdio.yaml# unevaluatedProperties: false clocks: items: - description: AHB clock used for the switch register interface - description: Switch system clock clock-names: items: - const: hclk - const: clk ethernet-ports: type: object additionalProperties: true patternProperties: "^(ethernet-)?port@[0-4]$": type: object additionalProperties: true properties: pcs-handle: maxItems: 1 description: phandle pointing to a PCS sub-node compatible with renesas,rzn1-miic.yaml# unevaluatedProperties: false required: - compatible - reg - clocks - clock-names - power-domains examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/r9a06g032-sysctrl.h> #include <dt-bindings/interrupt-controller/arm-gic.h> switch@44050000 { compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw"; reg = <0x44050000 0x10000>; clocks = <&sysctrl R9A06G032_HCLK_SWITCH>, <&sysctrl R9A06G032_CLK_SWITCH>; clock-names = "hclk", "clk"; power-domains = <&sysctrl>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dlr", "switch", "prp", "hub", "ptrn"; dsa,member = <0 0>; ethernet-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; label = "lan0"; phy-handle = <&switch0phy3>; pcs-handle = <&mii_conv4>; }; port@1 { reg = <1>; label = "lan1"; phy-handle = <&switch0phy1>; pcs-handle = <&mii_conv3>; }; port@4 { reg = <4>; ethernet = <&gmac2>; phy-mode = "internal"; fixed-link { speed = <1000>; full-duplex; }; }; }; mdio { #address-cells = <1>; #size-cells = <0>; reset-gpios = <&gpio0a 2 GPIO_ACTIVE_HIGH>; reset-delay-us = <15>; clock-frequency = <2500000>; switch0phy1: ethernet-phy@1{ reg = <1>; }; switch0phy3: ethernet-phy@3{ reg = <3>; }; }; }; |