Documentation / devicetree / bindings / memory-controllers / fsl / fsl,imx-weim.yaml


Based on kernel version 6.11. Page generated on 2024-09-24 08:21 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: i.MX Wireless External Interface Module (WEIM)

maintainers:
  - Shawn Guo <shawnguo@kernel.org>
  - Sascha Hauer <s.hauer@pengutronix.de>

description:
  The term "wireless" does not imply that the WEIM is literally an interface
  without wires. It simply means that this module was originally designed for
  wireless and mobile applications that use low-power technology. The actual
  devices are instantiated from the child nodes of a WEIM node.

properties:
  $nodename:
    pattern: "^memory-controller@[0-9a-f]+$"

  compatible:
    oneOf:
      - enum:
          - fsl,imx1-weim
          - fsl,imx27-weim
          - fsl,imx50-weim
          - fsl,imx51-weim
          - fsl,imx6q-weim
      - items:
          - enum:
              - fsl,imx31-weim
              - fsl,imx35-weim
          - const: fsl,imx27-weim
      - items:
          - enum:
              - fsl,imx6sx-weim
              - fsl,imx6ul-weim
          - const: fsl,imx6q-weim
 
  "#address-cells":
    const: 2
 
  "#size-cells":
    const: 1

  reg:
    maxItems: 1

  clocks:
    maxItems: 1

  interrupts:
    maxItems: 1

  ranges: true

  fsl,weim-cs-gpr:
    $ref: /schemas/types.yaml#/definitions/phandle
    description: |
      Phandle to the system General Purpose Register controller that contains
      WEIM CS GPR register, e.g. IOMUXC_GPR1 on i.MX6Q. IOMUXC_GPR1[11:0]
      should be set up as one of the following 4 possible values depending on
      the CS space configuration.
 
      IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
      ---------------------------------------------
              05          128M     0M     0M     0M
              033          64M    64M     0M     0M
              0113         64M    32M    32M     0M
              01111        32M    32M    32M    32M
 
      In case that the property is absent, the reset value or what bootloader
      sets up in IOMUXC_GPR1[11:0] will be used.

  fsl,burst-clk-enable:
    type: boolean
    description:
      The presence of this property indicates that the weim bus should operate
      in Burst Clock Mode.

  fsl,continuous-burst-clk:
    type: boolean
    description:
      Make Burst Clock to output continuous clock. Without this option Burst
      Clock will output clock only when necessary.

patternProperties:
  "^.*@[0-7],[0-9a-f]+$":
    type: object
    description: Devices attached to chip selects are represented as subnodes.
    $ref: fsl,imx-weim-peripherals.yaml
    additionalProperties: true
    required:
      - fsl,weim-cs-timing

required:
  - compatible
  - reg
  - clocks
  - "#address-cells"
  - "#size-cells"
  - ranges

allOf:
  - if:
      properties:
        compatible:
          not:
            contains:
              enum:
                - fsl,imx50-weim
                - fsl,imx6q-weim
    then:
      properties:
        fsl,weim-cs-gpr: false
        fsl,burst-clk-enable: false
  - if:
      not:
        required:
          - fsl,burst-clk-enable
    then:
      properties:
        fsl,continuous-burst-clk: false
  - if:
      properties:
        compatible:
          contains:
            const: fsl,imx1-weim
    then:
      patternProperties:
        "^.*@[0-7],[0-9a-f]+$":
          properties:
            fsl,weim-cs-timing:
              items:
                items:
                  - description: CSxU
                  - description: CSxL
  - if:
      properties:
        compatible:
          contains:
            enum:
              - fsl,imx27-weim
              - fsl,imx31-weim
              - fsl,imx35-weim
    then:
      patternProperties:
        "^.*@[0-7],[0-9a-f]+$":
          properties:
            fsl,weim-cs-timing:
              items:
                items:
                  - description: CSCRxU
                  - description: CSCRxL
                  - description: CSCRxA
  - if:
      properties:
        compatible:
          contains:
            enum:
              - fsl,imx50-weim
              - fsl,imx51-weim
              - fsl,imx6q-weim
              - fsl,imx6sx-weim
              - fsl,imx6ul-weim
    then:
      patternProperties:
        "^.*@[0-7],[0-9a-f]+$":
          properties:
            fsl,weim-cs-timing:
              items:
                items:
                  - description: CSxGCR1
                  - description: CSxGCR2
                  - description: CSxRCR1
                  - description: CSxRCR2
                  - description: CSxWCR1
                  - description: CSxWCR2

additionalProperties: false

examples:
  - |
    memory-controller@21b8000 {
        compatible = "fsl,imx6q-weim";
        reg = <0x021b8000 0x4000>;
        clocks = <&clks 196>;
        #address-cells = <2>;
        #size-cells = <1>;
        ranges = <0 0 0x08000000 0x08000000>;
        fsl,weim-cs-gpr = <&gpr>;
 
        flash@0,0 {
            compatible = "cfi-flash";
            reg = <0 0 0x02000000>;
            #address-cells = <1>;
            #size-cells = <1>;
            bank-width = <2>;
            fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
                                  0x0000c000 0x1404a38e 0x00000000>;
        };
    };