# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/leds/ti,lm3697.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: TI LM3697 Highly Efficient White LED Driver

maintainers:
  - Dan Murphy <dmurphy@ti.com>

description: >
  The LM3697 11-bit LED driver provides high-performance backlight dimming for
  1, 2, or 3 series LED strings while delivering up to 90% efficiency.
 
  This device is suitable for display and keypad lighting.

properties:
  compatible:
    const: ti,lm3697

  reg:
    maxItems: 1
 
  '#address-cells':
    const: 1
 
  '#size-cells':
    const: 0

  enable-gpios:
    description: GPIO pin to enable or disable the device.
    maxItems: 1

  vled-supply:
    description: LED supply for the device.

patternProperties:
  '^led@[01]$':
    description: LED control bank nodes.
    $ref: common.yaml#
    unevaluatedProperties: false

    properties:
      reg:
        description: Control bank selection (0 = bank A, 1 = bank B).
        maximum: 1

      led-sources:
        description: >
          HVLED strings associated with this control bank:

            0 - HVLED1
            1 - HVLED2
            2 - HVLED3
        minItems: 1
        maxItems: 3
        items:
          maximum: 2

      ti,brightness-resolution:
        description: Brightness resolution for the LED string.
        $ref: /schemas/types.yaml#/definitions/uint32
        maximum: 2047

      ramp-up-us:
        description: Ramp-up time in microseconds.
        minimum: 117
        maximum: 2048

      ramp-down-us:
        description: Ramp-down time in microseconds.
        minimum: 117
        maximum: 2048

    required:
      - reg
      - led-sources

required:
  - compatible
  - reg
  - '#address-cells'
  - '#size-cells'

additionalProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
 
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
 
        led-controller@36 {
            compatible = "ti,lm3697";
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <0x36>;
 
            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
            vled-supply = <&vbatt>;
 
            led@0 {
                reg = <0>;
                led-sources = <0 2>;
                ti,brightness-resolution = <2047>;
                ramp-up-us = <500>;
                ramp-down-us = <1000>;
                label = "white:first_backlight_cluster";
                linux,default-trigger = "backlight";
            };
 
            led@1 {
                reg = <1>;
                led-sources = <1>;
                ti,brightness-resolution = <255>;
                ramp-up-us = <500>;
                ramp-down-us = <1000>;
                label = "white:second_backlight_cluster";
                linux,default-trigger = "backlight";
            };
        };
    };