Based on kernel version 6.11. Page generated on 2024-09-24 08:21 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 | # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/leds/leds-lp55xx.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI/National Semiconductor LP55xx and LP8501 LED Drivers maintainers: - Jacek Anaszewski <jacek.anaszewski@gmail.com> - Pavel Machek <pavel@ucw.cz> description: | Bindings for the TI/National Semiconductor LP55xx and LP8501 multi channel LED Drivers. For more product information please see the link below: https://www.ti.com/lit/gpn/lp5521 https://www.ti.com/lit/gpn/lp5523 https://www.ti.com/lit/gpn/lp55231 https://www.ti.com/lit/gpn/lp5562 https://www.ti.com/lit/gpn/lp8501 properties: compatible: enum: - national,lp5521 - national,lp5523 - ti,lp55231 - ti,lp5562 - ti,lp5569 - ti,lp8501 reg: maxItems: 1 description: I2C slave address clock-mode: $ref: /schemas/types.yaml#/definitions/uint8 description: | Input clock mode enum: - 0 # automode - 1 # internal - 2 # external enable-gpios: maxItems: 1 description: | GPIO attached to the chip's enable pin label: true pwr-sel: $ref: /schemas/types.yaml#/definitions/uint8 description: | LP8501 specific property. Power selection for output channels. enum: - 0 # D1~9 are connected to VDD - 1 # D1~6 with VDD, D7~9 with VOUT - 2 # D1~6 with VOUT, D7~9 with VDD - 3 # D1~9 are connected to VOUT '#address-cells': const: 1 '#size-cells': const: 0 ti,charge-pump-mode: description: Set the operating mode of the internal charge pump as defined in <dt-bindings/leds/leds-lp55xx.h>. $ref: /schemas/types.yaml#/definitions/uint32 default: 3 # auto maximum: 3 patternProperties: '^multi-led@[0-8]$': type: object $ref: leds-class-multicolor.yaml# unevaluatedProperties: false properties: reg: maximum: 8 '#address-cells': const: 1 '#size-cells': const: 0 patternProperties: "^led@[0-8]$": type: object $ref: common.yaml# unevaluatedProperties: false properties: led-cur: $ref: /schemas/types.yaml#/definitions/uint8 description: | Current setting at each LED channel (mA x10, 0 if LED is not connected) minimum: 0 maximum: 255 max-cur: $ref: /schemas/types.yaml#/definitions/uint8 description: Maximum current at each LED channel. reg: maximum: 8 required: - reg "^led@[0-8]$": type: object $ref: common.yaml# unevaluatedProperties: false properties: led-cur: $ref: /schemas/types.yaml#/definitions/uint8 description: | Current setting at each LED channel (mA x10, 0 if LED is not connected) minimum: 0 maximum: 255 max-cur: $ref: /schemas/types.yaml#/definitions/uint8 description: Maximum current at each LED channel. reg: description: | Output channel for the LED. This is zero based channel identifier and the data sheet is a one based channel identifier. reg value to output to LED output number enum: - 0 # LED output D1 - 1 # LED output D2 - 2 # LED output D3 - 3 # LED output D4 - 4 # LED output D5 - 5 # LED output D6 - 6 # LED output D7 - 7 # LED output D8 - 8 # LED output D9 chan-name: $ref: /schemas/types.yaml#/definitions/string description: name of channel if: not: properties: compatible: contains: const: ti,lp8501 then: properties: pwr-sel: false required: - compatible - reg additionalProperties: false examples: - | #include <dt-bindings/leds/common.h> #include <dt-bindings/leds/leds-lp55xx.h> i2c { #address-cells = <1>; #size-cells = <0>; led-controller@32 { #address-cells = <1>; #size-cells = <0>; compatible = "ti,lp8501"; reg = <0x32>; clock-mode = /bits/ 8 <2>; pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */ ti,charge-pump-mode = <LP55XX_CP_BYPASS>; led@0 { reg = <0>; chan-name = "d1"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; led@1 { reg = <1>; chan-name = "d2"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; led@2 { reg = <2>; chan-name = "d3"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; led@3 { reg = <3>; chan-name = "d4"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; led@4 { reg = <4>; chan-name = "d5"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; led@5 { reg = <5>; chan-name = "d6"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; led@6 { reg = <6>; chan-name = "d7"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; led@7 { reg = <7>; chan-name = "d8"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; led@8 { reg = <8>; chan-name = "d9"; led-cur = /bits/ 8 <0x14>; max-cur = /bits/ 8 <0x20>; }; }; led-controller@33 { #address-cells = <1>; #size-cells = <0>; compatible = "national,lp5523"; reg = <0x33>; clock-mode = /bits/ 8 <0>; multi-led@2 { #address-cells = <1>; #size-cells = <0>; reg = <0x2>; color = <LED_COLOR_ID_RGB>; function = LED_FUNCTION_STANDBY; linux,default-trigger = "heartbeat"; led@0 { led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; reg = <0x0>; color = <LED_COLOR_ID_GREEN>; }; led@1 { led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; reg = <0x1>; color = <LED_COLOR_ID_BLUE>; }; led@6 { led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; reg = <0x6>; color = <LED_COLOR_ID_RED>; }; }; }; }; ... |