Documentation / devicetree / bindings / hwmon / lm75.yaml


Based on kernel version 6.11. Page generated on 2024-09-24 08:21 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/hwmon/lm75.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: LM75 hwmon sensor

maintainers:
  - Jean Delvare <jdelvare@suse.com>
  - Guenter Roeck <linux@roeck-us.net>

properties:
  compatible:
    enum:
      - adi,adt75
      - ams,as6200
      - atmel,at30ts74
      - dallas,ds1775
      - dallas,ds75
      - dallas,ds7505
      - gmt,g751
      - national,lm75
      - national,lm75a
      - national,lm75b
      - maxim,max6625
      - maxim,max6626
      - maxim,max31725
      - maxim,max31726
      - maxim,mcp980x
      - nxp,pct2075
      - st,stds75
      - st,stlm75
      - microchip,tcn75
      - ti,tmp1075
      - ti,tmp100
      - ti,tmp101
      - ti,tmp105
      - ti,tmp112
      - ti,tmp175
      - ti,tmp275
      - ti,tmp75
      - ti,tmp75b
      - ti,tmp75c

  reg:
    maxItems: 1

  vs-supply:
    description: phandle to the regulator that provides the +VS supply

  interrupts:
    maxItems: 1

required:
  - compatible
  - reg

allOf:
  - $ref: hwmon-common.yaml#
  - if:
      not:
        properties:
          compatible:
            contains:
              enum:
                - ams,as6200
                - ti,tmp100
                - ti,tmp101
                - ti,tmp112
    then:
      properties:
        interrupts: false

unevaluatedProperties: false

examples:
  - |
    i2c {
      #address-cells = <1>;
      #size-cells = <0>;
 
      sensor@48 {
        compatible = "st,stlm75";
        reg = <0x48>;
        vs-supply = <&vs>;
      };
    };
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    i2c {
      #address-cells = <1>;
      #size-cells = <0>;
 
      temperature-sensor@48 {
        compatible = "ams,as6200";
        reg = <0x48>;
        vs-supply = <&vs>;
        interrupt-parent = <&gpio1>;
        interrupts = <17 IRQ_TYPE_EDGE_BOTH>;
      };
    };