Based on kernel version 6.11
. Page generated on 2024-09-24 08:21 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 | # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/raydium,rm67191.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Raydium RM67171 OLED LCD panel with MIPI-DSI protocol maintainers: - Robert Chiras <robert.chiras@nxp.com> allOf: - $ref: panel-common.yaml# properties: compatible: const: raydium,rm67191 reg: maxItems: 1 port: true reset-gpios: true width-mm: true height-mm: true dsi-lanes: description: Number of DSI lanes to be used must be <3> or <4> $ref: /schemas/types.yaml#/definitions/uint32 enum: [3, 4] v3p3-supply: description: phandle to 3.3V regulator that powers the VDD_3V3 pin v1p8-supply: description: phandle to 1.8V regulator that powers the VDD_1V8 pin video-mode: description: | 0 - burst-mode 1 - non-burst with sync event 2 - non-burst with sync pulse $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] required: - compatible - reg - dsi-lanes - port additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> dsi { #address-cells = <1>; #size-cells = <0>; panel@0 { compatible = "raydium,rm67191"; reg = <0>; reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; dsi-lanes = <4>; width-mm = <68>; height-mm = <121>; video-mode = <1>; port { panel_in: endpoint { remote-endpoint = <&mipi_out>; }; }; }; }; ... |