Documentation / devicetree / bindings / soc / qcom / qcom,eud.yaml


Based on kernel version 6.11. Page generated on 2024-09-24 08:21 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/qcom/qcom,eud.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Embedded USB Debugger

maintainers:
  - Souradeep Chowdhury <quic_schowdhu@quicinc.com>

description:
  This binding is used to describe the Qualcomm Embedded USB Debugger, which is
  mini USB-hub implemented on chip to support USB-based debug capabilities.

properties:
  compatible:
    items:
      - enum:
          - qcom,sc7280-eud
      - const: qcom,eud

  reg:
    items:
      - description: EUD Base Register Region
      - description: EUD Mode Manager Register

  interrupts:
    description: EUD interrupt
    maxItems: 1

  ports:
    $ref: /schemas/graph.yaml#/properties/ports
    description:
      These ports is to be attached to the endpoint of the DWC3 controller node
      and type C connector node. The controller has the "usb-role-switch"
      property.

    properties:
      port@0:
        $ref: /schemas/graph.yaml#/properties/port
        description: This port is to be attached to the DWC3 controller.

      port@1:
        $ref: /schemas/graph.yaml#/properties/port
        description: This port is to be attached to the type C connector.

required:
  - compatible
  - reg
  - ports

additionalProperties: false

examples:
  - |
    eud@88e0000 {
           compatible = "qcom,sc7280-eud", "qcom,eud";
           reg = <0x88e0000 0x2000>,
                 <0x88e2000 0x1000>;
 
           ports {
                   #address-cells = <1>;
                   #size-cells = <0>;
                   port@0 {
                           reg = <0>;
                           eud_ep: endpoint {
                                   remote-endpoint = <&usb2_role_switch>;
                           };
                   };
 
                   port@1 {
                           reg = <1>;
                           eud_con: endpoint {
                                   remote-endpoint = <&con_eud>;
                           };
                   };
           };
    };