# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/mobileye/mobileye,eyeq6lplus-olb.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Mobileye EyeQ6Lplus SoC system controller

maintainers:
  - Benoît Monin <benoit.monin@bootlin.com>
  - Grégory Clement <gregory.clement@bootlin.com>
  - Théo Lebrun <theo.lebrun@bootlin.com>
  - Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>

description:
  OLB ("Other Logic Block") is a hardware block grouping smaller blocks.
  Clocks, resets, pinctrl are being handled from here. EyeQ6Lplus hosts
  a single instance providing 22 clocks, two reset domains and one bank
  of 32 pins.

properties:
  compatible:
    items:
      - const: mobileye,eyeq6lplus-olb
      - const: syscon

  reg:
    maxItems: 1
 
  '#reset-cells':
    description:
      First cell is reset domain index.
      Second cell is reset index inside that domain.
    const: 2
 
  '#clock-cells':
    const: 1

  clocks:
    maxItems: 1
    description:
      Input parent clock to all PLLs. Expected to be the main crystal.

  clock-names:
    const: ref

patternProperties:
  '-pins?$':
    type: object
    description: Pin muxing configuration.
    $ref: /schemas/pinctrl/pinmux-node.yaml#
    additionalProperties: false
    properties:
      pins: true
      function:
        enum: [gpio, timer0, timer1, uart_ssi, spi0, uart0, timer2, timer3,
               timer_ext0, spi1, timer_ext1, ext_ref_clk, mipi_ref_clk]
      bias-disable: true
      bias-pull-down: true
      bias-pull-up: true
      drive-strength: true
    required:
      - pins
      - function
    allOf:
      - if:
          properties:
            function:
              const: gpio
        then:
          properties:
            pins:
              items: # PA0 - PA31
                pattern: '^(PA[1,2]?[0-9]|PA3[0,1])$'
      - if:
          properties:
            function:
              const: timer0
        then:
          properties:
            pins:
              items:
                enum: [PA0, PA1]
      - if:
          properties:
            function:
              const: timer1
        then:
          properties:
            pins:
              items:
                enum: [PA2, PA3]
      - if:
          properties:
            function:
              const: uart_ssi
        then:
          properties:
            pins:
              items:
                enum: [PA4, PA5]
      - if:
          properties:
            function:
              const: spi0
        then:
          properties:
            pins:
              items:
                enum: [PA6, PA7, PA8, PA9, PA10]
      - if:
          properties:
            function:
              const: uart0
        then:
          properties:
            pins:
              items:
                enum: [PA11, PA12]
      - if:
          properties:
            function:
              const: timer2
        then:
          properties:
            pins:
              items:
                enum: [PA13, PA14]
      - if:
          properties:
            function:
              const: timer3
        then:
          properties:
            pins:
              items:
                enum: [PA15, PA16]
      - if:
          properties:
            function:
              const: timer_ext0
        then:
          properties:
            pins:
              items:
                enum: [PA17, PA18, PA19, PA20]
      - if:
          properties:
            function:
              const: spi1
        then:
          properties:
            pins:
              items:
                enum: [PA21, PA22, PA23, PA24, PA25]
      - if:
          properties:
            function:
              const: timer_ext1
        then:
          properties:
            pins:
              items:
                enum: [PA26, PA27, PA28, PA29]
      - if:
          properties:
            function:
              const: ext_ref_clk
        then:
          properties:
            pins:
              items:
                enum: [PA30]
      - if:
          properties:
            function:
              const: mipi_ref_clk
        then:
          properties:
            pins:
              items:
                enum: [PA31]

required:
  - compatible
  - reg
  - '#clock-cells'
  - clocks
  - clock-names
  - '#reset-cells'

additionalProperties: false

examples:
  - |
    soc {
      #address-cells = <2>;
      #size-cells = <2>;
 
      system-controller@e8400000 {
        compatible = "mobileye,eyeq6lplus-olb", "syscon";
        reg = <0 0xe8400000 0x0 0x80000>;
        #reset-cells = <2>;
        #clock-cells = <1>;
        clocks = <&xtal>;
        clock-names = "ref";
      };
    };