Documentation / devicetree / bindings / input / ilitek,ili2901.yaml


Based on kernel version 6.10. Page generated on 2024-07-16 09:00 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/ilitek,ili2901.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Ilitek ILI2901 touchscreen controller

maintainers:
  - Jiri Kosina <jkosina@suse.com>

description:
  Supports the Ilitek ILI2901 touchscreen controller.
  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.

allOf:
  - $ref: /schemas/input/touchscreen/touchscreen.yaml#

properties:
  compatible:
    enum:
      - ilitek,ili2901

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  panel: true

  reset-gpios:
    maxItems: 1

  vcc33-supply: true

  vccio-supply: true

required:
  - compatible
  - reg
  - interrupts
  - vcc33-supply

additionalProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
 
    i2c {
      #address-cells = <1>;
      #size-cells = <0>;
 
      touchscreen@41 {
        compatible = "ilitek,ili2901";
        reg = <0x41>;
 
        interrupt-parent = <&tlmm>;
        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 
        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
        vcc33-supply = <&pp3300_ts>;
      };
    };