Documentation / devicetree / bindings / firmware / qcom,scm.yaml


Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/firmware/qcom,scm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: QCOM Secure Channel Manager (SCM)

description: |
  Qualcomm processors include an interface to communicate to the secure firmware.
  This interface allows for clients to request different types of actions.
  These can include CPU power up/down, HDCP requests, loading of firmware,
  and other assorted actions.

maintainers:
  - Bjorn Andersson <bjorn.andersson@linaro.org>
  - Robert Marko <robimarko@gmail.com>
  - Guru Das Srinagesh <quic_gurus@quicinc.com>

properties:
  compatible:
    items:
      - enum:
          - qcom,scm-apq8064
          - qcom,scm-apq8084
          - qcom,scm-ipq4019
          - qcom,scm-ipq5018
          - qcom,scm-ipq5332
          - qcom,scm-ipq6018
          - qcom,scm-ipq806x
          - qcom,scm-ipq8074
          - qcom,scm-ipq9574
          - qcom,scm-mdm9607
          - qcom,scm-msm8226
          - qcom,scm-msm8660
          - qcom,scm-msm8916
          - qcom,scm-msm8953
          - qcom,scm-msm8960
          - qcom,scm-msm8974
          - qcom,scm-msm8976
          - qcom,scm-msm8994
          - qcom,scm-msm8996
          - qcom,scm-msm8998
          - qcom,scm-qcm2290
          - qcom,scm-qdu1000
          - qcom,scm-sa8775p
          - qcom,scm-sc7180
          - qcom,scm-sc7280
          - qcom,scm-sc8180x
          - qcom,scm-sc8280xp
          - qcom,scm-sdm670
          - qcom,scm-sdm845
          - qcom,scm-sdx55
          - qcom,scm-sdx65
          - qcom,scm-sdx75
          - qcom,scm-sm6115
          - qcom,scm-sm6125
          - qcom,scm-sm6350
          - qcom,scm-sm6375
          - qcom,scm-sm7150
          - qcom,scm-sm8150
          - qcom,scm-sm8250
          - qcom,scm-sm8350
          - qcom,scm-sm8450
          - qcom,scm-sm8550
          - qcom,scm-sm8650
          - qcom,scm-qcs404
          - qcom,scm-x1e80100
      - const: qcom,scm

  clocks:
    minItems: 1
    maxItems: 3

  clock-names:
    minItems: 1
    maxItems: 3

  dma-coherent: true

  interconnects:
    maxItems: 1

  interconnect-names:
    maxItems: 1
 
  '#reset-cells':
    const: 1

  interrupts:
    description:
      The wait-queue interrupt that firmware raises as part of handshake
      protocol to handle sleeping SCM calls.
    maxItems: 1

  qcom,sdi-enabled:
    description:
      Indicates that the SDI (Secure Debug Image) has been enabled by TZ
      by default and it needs to be disabled.
      If not disabled WDT assertion or reboot will cause the board to hang
      in the debug mode.
    type: boolean

  qcom,dload-mode:
    $ref: /schemas/types.yaml#/definitions/phandle-array
    items:
      - items:
          - description: phandle to TCSR hardware block
          - description: offset of the download mode control register
    description: TCSR hardware block

allOf:
  # Clocks
  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,scm-apq8064
              - qcom,scm-apq8084
              - qcom,scm-mdm9607
              - qcom,scm-msm8226
              - qcom,scm-msm8660
              - qcom,scm-msm8916
              - qcom,scm-msm8953
              - qcom,scm-msm8960
              - qcom,scm-msm8974
              - qcom,scm-msm8976
              - qcom,scm-qcm2290
              - qcom,scm-sm6375
    then:
      required:
        - clocks
        - clock-names
    else:
      properties:
        clock-names: false
        clocks: false

  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,scm-apq8064
              - qcom,scm-msm8660
              - qcom,scm-msm8960
              - qcom,scm-qcm2290
              - qcom,scm-sm6375
    then:
      properties:
        clock-names:
          items:
            - const: core

        clocks:
          maxItems: 1

  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,scm-apq8084
              - qcom,scm-mdm9607
              - qcom,scm-msm8226
              - qcom,scm-msm8916
              - qcom,scm-msm8953
              - qcom,scm-msm8974
              - qcom,scm-msm8976
    then:
      properties:
        clock-names:
          items:
            - const: core
            - const: bus
            - const: iface

        clocks:
          minItems: 3
          maxItems: 3
 
  # Interrupts
  - if:
      not:
        properties:
          compatible:
            contains:
              enum:
                - qcom,scm-sm8450
                - qcom,scm-sm8550
                - qcom,scm-sm8650
    then:
      properties:
        interrupts: false

required:
  - compatible

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 
    firmware {
        scm {
            compatible = "qcom,scm-msm8916", "qcom,scm";
            clocks = <&gcc GCC_CRYPTO_CLK>,
                     <&gcc GCC_CRYPTO_AXI_CLK>,
                     <&gcc GCC_CRYPTO_AHB_CLK>;
            clock-names = "core", "bus", "iface";
        };
    };