# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: PTN5150 CC (Configuration Channel) Logic device

maintainers:
  - Krzysztof Kozlowski <krzk@kernel.org>

description: |
  PTN5150 is a small thin low power CC logic chip supporting the USB Type-C
  connector application with CC control logic detection and indication
  functions.  It is interfaced to the host controller using an I2C interface.

properties:
  compatible:
    const: nxp,ptn5150

  int-gpios:
    maxItems: 1
    deprecated: true
    description:
      GPIO pin (input) connected to the PTN5150's INTB pin.
      Use "interrupts" instead.

  interrupts:
    maxItems: 1

  reg:
    maxItems: 1

  vbus-gpios:
    maxItems: 1
    description:
      GPIO pin (output) used to control VBUS. If skipped, no such control
      takes place.

required:
  - compatible
  - interrupts
  - reg

additionalProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
 
        ptn5150@1d {
            compatible = "nxp,ptn5150";
            reg = <0x1d>;
            interrupt-parent = <&msmgpio>;
            interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
            vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
        };
    };