Based on kernel version 5.6.13
. Page generated on 2020-05-15 16:46 EST
.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 | Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel Required properties: - compatible: should be "koe,tx14d24vm1bpa" - backlight: phandle of the backlight device attached to the panel - power-supply: single regulator to provide the supply voltage Required nodes: - port: Parallel port mapping to connect this display This panel needs single power supply voltage. Its backlight is conntrolled via PWM signal. Example: -------- Example device-tree definition when connected to iMX53 based board lcd_panel: lcd-panel { compatible = "koe,tx14d24vm1bpa"; backlight = <&backlight_lcd>; power-supply = <®_3v3>; port { lcd_panel_in: endpoint { remote-endpoint = <&lcd_display_out>; }; }; }; Then one needs to extend the dispX node: lcd_display: disp1 { port@1 { reg = <1>; lcd_display_out: endpoint { remote-endpoint = <&lcd_panel_in>; }; }; }; |