Based on kernel version 4.7.2. Page generated on 2016-08-22 22:45 EST.
1 How to set up the Technisat/B2C2 Flexcop devices 2 ================================================ 3 4 1) Find out what device you have 5 ================================ 6 7 Important Notice: The driver does NOT support Technisat USB 2 devices! 8 9 First start your linux box with a shipped kernel: 10 lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example: 11 02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / 12 Technisat SkyStar2 DVB card (rev 02) 13 14 dmesg | grep frontend may show you for example: 15 DVB: registering frontend 0 (Conexant CX24123/CX24109)... 16 17 2) Kernel compilation: 18 ====================== 19 20 If the Flexcop / Technisat is the only DVB / TV / Radio device in your box 21 get rid of unnecessary modules and check this one: 22 "Multimedia support" => "Customise analog and hybrid tuner modules to build" 23 In this directory uncheck every driver which is activated there 24 (except "Simple tuner support" for ATSC 3rd generation only -> see case 9 please). 25 26 Then please activate: 27 2a) Main module part: 28 "Multimedia support" => "DVB/ATSC adapters" 29 => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" 30 31 a.) => "Technisat/B2C2 Air/Sky/Cable2PC PCI" (PCI card) or 32 b.) => "Technisat/B2C2 Air/Sky/Cable2PC USB" (USB 1.1 adapter) 33 and for troubleshooting purposes: 34 c.) => "Enable debug for the B2C2 FlexCop drivers" 35 36 2b) Frontend / Tuner / Demodulator module part: 37 "Multimedia support" => "DVB/ATSC adapters" 38 => "Customise the frontend modules to build" "Customise DVB frontends" => 39 40 1.) SkyStar DVB-S Revision 2.3: 41 a.) => "Zarlink VP310/MT312/ZL10313 based" 42 b.) => "Generic I2C PLL based tuners" 43 44 2.) SkyStar DVB-S Revision 2.6: 45 a.) => "ST STV0299 based" 46 b.) => "Generic I2C PLL based tuners" 47 48 3.) SkyStar DVB-S Revision 2.7: 49 a.) => "Samsung S5H1420 based" 50 b.) => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" 51 c.) => "ISL6421 SEC controller" 52 53 4.) SkyStar DVB-S Revision 2.8: 54 a.) => "Conexant CX24123 based" 55 b.) => "Conexant CX24113/CX24128 tuner for DVB-S/DSS" 56 c.) => "ISL6421 SEC controller" 57 58 5.) AirStar DVB-T card: 59 a.) => "Zarlink MT352 based" 60 b.) => "Generic I2C PLL based tuners" 61 62 6.) CableStar DVB-C card: 63 a.) => "ST STV0297 based" 64 b.) => "Generic I2C PLL based tuners" 65 66 7.) AirStar ATSC card 1st generation: 67 a.) => "Broadcom BCM3510" 68 69 8.) AirStar ATSC card 2nd generation: 70 a.) => "NxtWave Communications NXT2002/NXT2004 based" 71 b.) => "Generic I2C PLL based tuners" 72 73 9.) AirStar ATSC card 3rd generation: 74 a.) => "LG Electronics LGDT3302/LGDT3303 based" 75 b.) "Multimedia support" => "Customise analog and hybrid tuner modules to build" 76 => "Simple tuner support" 77 78 Author: Uwe Bugla <uwe.bugla@gmx.de> August 2009