Based on kernel version 6.8. Page generated on 2024-03-11 21:26 EST.
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 | .. SPDX-License-Identifier: GPL-2.0+ HTE Kernel provider driver ========================== Description ----------- The Nvidia tegra HTE provider also known as GTE (Generic Timestamping Engine) driver implements two GTE instances: 1) GPIO GTE and 2) LIC (Legacy Interrupt Controller) IRQ GTE. Both GTE instances get the timestamp from the system counter TSC which has 31.25MHz clock rate, and the driver converts clock tick rate to nanoseconds before storing it as timestamp value. GPIO GTE -------- This GTE instance timestamps GPIO in real time. For that to happen GPIO needs to be configured as input. Only the always on (AON) GPIO controller instance supports timestamping GPIOs in real time as it is tightly coupled with the GPIO GTE. To support this, GPIOLIB adds two optional APIs as mentioned below. The GPIO GTE code supports both kernel and userspace consumers. The kernel space consumers can directly talk to HTE subsystem while userspace consumers timestamp requests go through GPIOLIB CDEV framework to HTE subsystem. The hte devicetree binding described at ``Documentation/devicetree/bindings/timestamp`` provides an example of how a consumer can request an GPIO line. See gpiod_enable_hw_timestamp_ns() and gpiod_disable_hw_timestamp_ns(). For userspace consumers, GPIO_V2_LINE_FLAG_EVENT_CLOCK_HTE flag must be specified during IOCTL calls. Refer to ``tools/gpio/gpio-event-mon.c``, which returns the timestamp in nanoseconds. LIC (Legacy Interrupt Controller) IRQ GTE ----------------------------------------- This GTE instance timestamps LIC IRQ lines in real time. The hte devicetree binding described at ``Documentation/devicetree/bindings/timestamp`` provides an example of how a consumer can request an IRQ line. Since it is a one-to-one mapping with IRQ GTE provider, consumers can simply specify the IRQ number that they are interested in. There is no userspace consumer support for this GTE instance in the HTE framework. The provider source code of both IRQ and GPIO GTE instances is located at ``drivers/hte/hte-tegra194.c``. The test driver ``drivers/hte/hte-tegra194-test.c`` demonstrates HTE API usage for both IRQ and GPIO GTE. |