Based on kernel version 4.16.1. Page generated on 2018-04-09 11:52 EST.
1 Simtec Electronics EB2410ITX (BAST) 2 =================================== 3 4 http://www.simtec.co.uk/products/EB2410ITX/ 5 6 Introduction 7 ------------ 8 9 The EB2410ITX is a S3C2410 based development board with a variety of 10 peripherals and expansion connectors. This board is also known by 11 the shortened name of Bast. 12 13 14 Configuration 15 ------------- 16 17 To set the default configuration, use `make bast_defconfig` which 18 supports the commonly used features of this board. 19 20 21 Support 22 ------- 23 24 Official support information can be found on the Simtec Electronics 25 website, at the product page http://www.simtec.co.uk/products/EB2410ITX/ 26 27 Useful links: 28 29 - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html 30 31 - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html 32 33 - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html 34 and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html 35 36 37 MTD 38 --- 39 40 The NAND and NOR support has been merged from the linux-mtd project. 41 Any problems, see http://www.linux-mtd.infradead.org/ for more 42 information or up-to-date versions of linux-mtd. 43 44 45 IDE 46 --- 47 48 Both onboard IDE ports are supported, however there is no support for 49 changing speed of devices, PIO Mode 4 capable drives should be used. 50 51 52 Maintainers 53 ----------- 54 55 This board is maintained by Simtec Electronics. 56 57 58 Copyright 2004 Ben Dooks, Simtec Electronics