# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/remoteproc/qcom,milos-pas.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Milos SoC Peripheral Authentication Service

maintainers:
  - Luca Weiss <luca.weiss@fairphone.com>

description:
  Qualcomm Milos SoC Peripheral Authentication Service loads and boots firmware
  on the Qualcomm DSP Hexagon cores.

properties:
  compatible:
    enum:
      - qcom,milos-adsp-pas
      - qcom,milos-cdsp-pas
      - qcom,milos-mpss-pas
      - qcom,milos-wpss-pas

  reg:
    maxItems: 1

  clocks:
    items:
      - description: XO clock

  clock-names:
    items:
      - const: xo

  interrupts:
    minItems: 6
    maxItems: 6

  interrupt-names:
    minItems: 6
    maxItems: 6

  qcom,qmp:
    $ref: /schemas/types.yaml#/definitions/phandle
    description: Reference to the AOSS side-channel message RAM.

  smd-edge: false

  firmware-name:
    minItems: 1
    items:
      - description: Firmware name of the Hexagon core
      - description: Firmware name of the Hexagon Devicetree

  memory-region:
    minItems: 1
    items:
      - description: Memory region for core Firmware authentication
      - description: Memory region for Devicetree Firmware authentication

required:
  - compatible
  - reg
  - memory-region

allOf:
  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
  - if:
      properties:
        compatible:
          enum:
            - qcom,milos-adsp-pas
            - qcom,milos-cdsp-pas
    then:
      properties:
        memory-region:
          minItems: 2
        firmware-name:
          minItems: 2
    else:
      properties:
        memory-region:
          maxItems: 1
        firmware-name:
          maxItems: 1

  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,milos-adsp-pas
    then:
      properties:
        power-domains:
          items:
            - description: LCX power domain
            - description: LMX power domain
        power-domain-names:
          items:
            - const: lcx
            - const: lmx

  - if:
      properties:
        compatible:
          enum:
            - qcom,milos-cdsp-pas
            - qcom,milos-wpss-pas
    then:
      properties:
        power-domains:
          items:
            - description: CX power domain
            - description: MX power domain
        power-domain-names:
          items:
            - const: cx
            - const: mx

  - if:
      properties:
        compatible:
          enum:
            - qcom,milos-mpss-pas
    then:
      properties:
        power-domains:
          items:
            - description: CX power domain
            - description: MSS power domain
        power-domain-names:
          items:
            - const: cx
            - const: mss

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/qcom,rpmh.h>
    #include <dt-bindings/interconnect/qcom,icc.h>
    #include <dt-bindings/interconnect/qcom,milos-rpmh.h>
    #include <dt-bindings/interrupt-controller/irq.h>
    #include <dt-bindings/mailbox/qcom-ipcc.h>
    #include <dt-bindings/power/qcom,rpmhpd.h>
 
    remoteproc@3000000 {
        compatible = "qcom,milos-adsp-pas";
        reg = <0x03000000 0x10000>;
 
        interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
                              <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
                              <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
                              <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
                              <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
                              <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
        interrupt-names = "wdog",
                          "fatal",
                          "ready",
                          "handover",
                          "stop-ack",
                          "shutdown-ack";
 
        clocks = <&rpmhcc RPMH_CXO_CLK>;
        clock-names = "xo";
 
        power-domains = <&rpmhpd RPMHPD_LCX>,
                        <&rpmhpd RPMHPD_LMX>;
        power-domain-names = "lcx",
                             "lmx";
 
        interconnects = <&lpass_ag_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
                         &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
 
        memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
 
        firmware-name = "qcom/milos/vendor/device/adsp.mbn",
                        "qcom/milos/vendor/device/adsp_dtb.mbn";
 
        qcom,qmp = <&aoss_qmp>;
 
        qcom,smem-states = <&smp2p_adsp_out 0>;
        qcom,smem-state-names = "stop";
 
        glink-edge {
            interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
                                         IPCC_MPROC_SIGNAL_GLINK_QMP
                                         IRQ_TYPE_EDGE_RISING>;
            mboxes = <&ipcc IPCC_CLIENT_LPASS
                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
 
            label = "lpass";
            qcom,remote-pid = <2>;
 
            /* ... */
        };
    };