Services in Fedora 9

NOTE: The content of this page may be outdated. Links may not be valid and the steps detailed may no longer work. This page is saved for archival purposes only.

The following is a brief explanation on usage and recommendations for some (not all) of the different services packaged with Fedora 9.

Understanding Services

Please read the guide on managing services in Fedora. This includes an explanation for services/daemons, runlevels and various tools available to manage your services.

To control services either use chkconfig or ntsysv if you are using the command line, or use system-config-services in the GUI. Gnome users: System > Administration > Services. You will require root access to modify services.

Individual Services

The following is a brief explanation on usage and recommendations for services packaged with Fedora 9. This is not an exhaustive list. Be careful, do not disable things that you are not sure if you need or if you do not understand or know what they are.

IT IS NOT RECOMMENDED TO DISABLE THE FOLLOWING (unless you know what you are doing).
haldaemon, messagebus, klogd, rsyslogd

NetworkManager is service (with additional tools) meant to automate management of both network devices and network connections. Many laptop users who switch between Wireless WiFi connections and/or Wired Ethernet connections may find this useful. Fedora 9 has this enabled by default. If your connections work properly then you can leave this default. If however you have problems or you prefer the previous network service, then disable NetworkManager and enable the network service. Note that you should make sure your network settings are correct either via system-config-network for the network service, and/or nm-connection-editor for NetworkManager. Servers/desktops with fixed IP's may prefer network service. More information can be found on Fedora 9 - Network Management.

Advanced Configuration and Power Interface daemon which controls and allows interfacing to power management and certain input devices. It is recommended to be enabled only if you need it. If you are running a modern graphical desktop (GNOME, KDE) then many ACPI functions should be supported with the acpid daemon. Test disabling it, if you have power management issues (suspend, sleep, wakeup) then re-enable it. If you run without graphics (i.e. runlevel 3) you may find this service necessary for ACPI functions.

These are schedulers with each having slightly different purposes. It is recommended you keep the general purpose scheduler cron enabled, especially if you keep your computer running for long periods of time. If you are running a server look into which schedulers you require. Most likely atd and anacron should be disabled for desktops/laptops. Please note that some sheduled tasks such as cleaning /tmp or /var may require specific schedulers.

This saves audit records generated by the kernel. This information can be used in different ways. SELinux uses the audit daemon to record events. While there are other logging services it is recommended you leave this enabled (especially for users with SELinux enabled). Some information on how to utilize audit can be found on RH Magazine.

Avahi is an implementation of zeroconf and is useful for detecting devices and services on local network without a DNS server. This is also the same as mDNS. Most users may have this disabled. Please note that in order to use the networked audio functionality of Pulse Audio you will need Avahi enabled.

Bluetooth is for portable local wireless devices (NOT wifi,802.11). Some laptops come with bluetooth support. There are bluetooth mice, headsets and cell phone accessories. Most people do not have bluetooth support or devices, and should disable this. Other services with bluetooth: hcid manages all devices, hidd provides support for input devices (keyboard, mouse), dund supports dialup networking over bluetooth, pand allows connections to ethernet networks over bluetooth.

These services support the automatic seeding and tracking for torrents used by the peer-to-peer networking system BitTorrent. These should be disabled unless you specifically wish to seed or track torrents. By seeding you are essentially sharing the contents of the torrent with others and by tracking you are coordinate the action of other BitTorrent clients. More information from a BitTorrent FAQ. Keep in mind these require network bandwidth and other configuration as well.

This throttles your CPU runtime frequency to save power. Many modern laptop CPU's support this feature and now many desktops also support this. Most people should enable only if they are users of Pentium-M, Centrino, AMD PowerNow, Transmetta, Intel SpeedStep, Athlon-64, Athlon-X2, Intel Core 2 hardware. Laptop users are highly recommended to leave this enabled. Disable this if you want your CPU to remain at a fixed state.

Used for printing. These should be enabled only if you have CUPS compatible printer that works in Fedora.

This service is specific to Fedora's installation process meant to perform certain tasks that should only be executed once upon booting after installation. Even though it verifies it has been run before (using /etc/sysconfig/firstboot), it can be disabled.

This services provides functionality to other services to mount filesystems using Fuse. The GNOME virtual filesystem requires this and allows easier access to multiple networking filesystems. This should be left enabled.

This is the console mouse pointer (no graphics). If you do not use the text console (CTRL-ALT-F1,F2..) then disable this. However it is good practice to leave this enabled for runlevel 3 (console) and disabled for runlevel 5 (x-server).

HAL refers to the Hardware Abstraction Layer. This is a critical service for collecting and maintaing information about hardware from several sources. Fedora requires this, hence leave this enabled. Read for an overview of HAL.

Hsqldb is a java database server and unless you are doing Java development this should be left disabled.

This is the Apache HTTP Web Server. If you installed this and are doing web development then leave this enabled. However most desktop users and/or non-developers should leave this disabled.

This is the standard Linux software firewall. This is highly recommended if you are directly connected to internet (cable, DSL, T1). It is not required if you use a hardware firewall (D-Link, Netgear, Linksys, etc) but it is still recommended.

This services is the firewall for IPv6 communication. If you are not using IPv6 (most users), then you can disable this.

IrDA support infrared communications between devices (laptops, PDA's, mobile phones, calculators, etc). This should be disabled for most users.

This service is to increase performance across processors on a multiprocessor system. For users who do not have multiple processors/multiple cores this should be disabled. However newer computers with multi-core CPU's (Intel Core 2 Duo, AMD X2) should enable this. Leaving this enabled will not effect performance on single CPU/single core systems.

This is another form of internet connect service/hardware. Unless you have an ISDN modem, disable this.

This is a reporting service that will send specific debugging information to kernel developers when the kernel encounters certain problems known as "oops". More information can be found on the kernel oops website. This can be disabled. However users running development kernels or wish to help debugging kernel issues should enable this.

lm_sensors provides monitoring for motherboard sensor values or specific hardware (commonly used with laptops or high-end servers). It is useful for watching realtime values for PC health, etc. This is also popular with GKrellM users. It is recommended to disable this unless you have a need.

Is useful for monitoring Software RAID or LVM information. It is not a critical service and may be disabled.

This is a service that allows special microcode updates to an Intel CPU (Pentium Pro, PII, Celeron, PIII, Xeon, Pentium 4 etc.). These are updates that are written at every boot. This should be enabled only if you have have an Intel brand CPU.

This is an IPC (Interprocess Communication) service for Linux. Specifically this communicates with D-BUS, a critical component. It is highly recommended to leave this enabled.

This is used for monitoring Multi-Path devices which are storage devices that can be accessed by more than 1 controller or method. This should be disabled.

Initializes network console logging. This can be left to its default disabled state.

This is used for automatic mounting of any shared network file space such as NFS, Samba, etc on bootup. Useful if you connect to another server or filesharing on your local network. Most single desktop/laptop users should have this disabled.

Netplugd can monitor network interfaces and executes commands when their state changes. This can be left to default disabled.

This the standard network file sharing for Unix/Linux/BSD style operating systems. Unless you require to share data in this manner, disable this.

This daemon handles passwords and caches them for naming/authentication services like NIS, NIS+, LDAP, or hesiod. This should be disabled.

This automatically updates the system time from the internet. Mentioned in the installation process. If you have an active ("always-on") internet connection it is recommended you enable this, but it is not required.

This sets the system time according to NTP. This should be disabled as the ntpd service should provide this functionality.

Provides support for Smart Cards and Smart Card Readers. This are small chip like devices that are embedded in certain credit cards, identification cards, etc. Unless you have such a reader, this should be disabled.

Is used to monitor and restore proper file contexts for SELinux. This is nNOT required but highly recommended if you use SELinux.

This manages remote procedure call support for other services (such as NFS or NIS). This is similar to 'portmap'. This can be disabled if you have no other services depend on it.

Used for NFS v4. Unless you require or use NFS v4, these should be disabled.

Unless you run a server or you like to transfer or support a locally shared IMAP or POP3 service, most people do NOT need a mail transport agent. If you check your mail on the web (hotmail/yahoo/gmail) or you use a mail program such as Thunderbird, Kmail, Evolution, etc. then you should disable this.

This is the SELinux Troubleshooting Daemon. This services provides information to the setroubleshoot Browser. This application provides notices on the desktop if there were SELinux problems (usually AVC denials. While this is not a critical service it is incredibly helpful for debuggin SELinux issues. Leave this enabled only if you have SELinux enabled.

The SMART Disk Monitoring Daemon can be used to monitor and predict disk failure or problems on hard disk that support this. Most desktop users may not need this unless there is possible problems, but is it recommend to be left enabled (especially for servers). Note that some harddrives may not report any (useful) information to Smart.

The SAMBA daemon is required to share files from Linux to Windows. This should be enabled only if you have windows computers that require file access to Linux. There is information on configuring Samba for Fedora 9.

This daemon provides monthly information for Smolt which is gather statistics and information to assist Fedora developers. Statistics are available. Users who wish to help and share information should enable this, otherwise leave this disabled.

SSH allows other users to log into or run applications on your computer from another computer on your network or remotely. This is a potential security issue. This is not needed if you have no other computers or no need to login from a remote location (work, school, etc.). Most likely this should be disabled.

The device management system Fedora uses is 'udev'. By default 'udev' supports many rules, permissions and behaviours for devices. This service allows for saving user applied rules. It is highly recommended to leave enabled.

This service is required if you use a wireless card that requires WPA based encryption to connect to an Access Point, VPN or Radius Server. Most other users can leave this disabled.

More Information / Translations

Comments, suggestions, questions or any feedback welcome for this page or any of my Resources. Please use the contact link.

Help Out: If you found this guide or any Resource helpful, please consider supporting this site by recommending this page to others or linking to this page. I appreciate all the support I receive. Thank you in advance.

If you wish to thank me via Amazon.com wishlist.

Disclaimer: The author makes no claim to the accuracy of the information provided. This information is provided in the hope that it will be useful, but WITHOUT ANY WARRANTY. There is no implied support from referencing this guide. Any help that is provided is at will. Use this information at your own risk. Always make proper backups and use caution when modifying critical system files.

PLEASE DO NOT mirror, translate or duplicate this page without contacting me.

Services in Fedora 9

Mauriat Miranda (https://www.mjmwired.net/contact/)

Other Guides/Resources

Published: 11 May 2008 (updated: 11 May 2008)